Envoy 4WD V8-5.3L VIN M (2005)
4. Install the power steering hose assembly (1) to the vehicle.
5. Notice: Refer to Fastener in Service Precautions.
Install the power steering hose assembly rear bracket (2) mounting bolt.
Tighten the bolt to 10 Nm (89 inch lbs.).
6. Install the power steering pressure hose retaining clip.
7. Install the power steering hose assembly front bracket mounting bolt (3).
8. Install the power steering cooler hose (3) the the power steering pump (2).
9. Notice: Refer to Component Fastener Tightening Notice in Service Precautions.
Connect the power steering pressure (1) to the power steering pump (2).
Tighten the power steering pressure hose fitting to 25 Nm (18 inch lbs.).
10. Install the ECM to the ECM mounting bracket.
11. Raise and support the vehicle. Refer to Vehicle Lifting.
12. Install the power steering return hose and the power steering cooler hose to the power steering cooler.
