Envoy 4WD V8-5.3L VIN M (2005)
Tires: Service and Repair
Tire Hoist and Shaft Replacement
Tire Hoist and Shaft Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the spare tire from the spare tire carrier.
3. Remove spare wheel hoist assembly mounting bolts from the frame.
4. Remove the spare wheel hoist assembly from the vehicle.
Installation Procedure
1. Install the spare wheel hoist assembly to the vehicle.
2. Install spare wheel hoist assembly mounting bolts to the frame
Tighten the spare wheel hoist assembly mounting bolts to the frame to 50 Nm (37 inch lbs.).
Notice: Refer to Fastener in Service Precautions.
3. Install the spare tire to the spare tire carrier.
4. Lower the vehicle.
