gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3437 > < Initial Inspection and Diagnostic Overview
Page 1
background image

Body Control Module: Symptom Related Diagnostic Procedures

A Symptoms - Computer/Integrating Systems

SYMPTOMS

IMPORTANT:  The following steps must be completed before using the symptom tables.

1. Perform the Diagnostic System Check - Vehicle in Vehicle DTC Information before using the symptom tables in order to verify that all of the

following are true:
-

There are no DTCs set.

-

The control modules can communicate via the serial data links.  See: Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnostic System Check - Vehicle

2. Review the system operation in order to familiarize yourself with the system functions. Refer to:

-

Data Link Communications Description and Operation

-

Body Control System Description and Operation

-

Retained Accessory Power (RAP) Description and Operation

Visual/Physical Inspection
-

Inspect for aftermarket devices which could affect the operation of the systems.

-

Inspect the easily accessible or visible system components for obvious damage or conditions which could cause the symptom.

Intermittent
Faulty electrical connections or wiring may be the cause of intermittent conditions.

Symptom List
Refer to a symptom diagnostic procedure from the following list in order to diagnose the symptom:

-

Scan Tool Does Not Power Up See: Information Bus/Testing and Inspection/Symptom Related Diagnostic Procedures

-

Scan Tool Does Not Communicate with Class 2 Device (4.2L w/o Immobilizer) 

-

Scan Tool Does Not Communicate with Class 2 Device (4.2L w/Immobilizer) 

-

Scan Tool Does Not Communicate with Class 2 Device (5.3L) See: Information Bus/Testing and Inspection/Symptom Related Diagnostic
Procedures

-

Scan Tool Does Not Communicate with High Speed GMLAN Device See: Information Bus/Testing and Inspection/Symptom Related Diagnostic
Procedures/Scan Tool Does Not Communicate With High Speed GMLAN Device

-

Power Mode Mismatch See: Power Mode Mismatch

-

Retained Accessory Power (RAP) On After Timeout (Except XUV) See: Diagnosis By Symptom - Computer/Integrating Systems/Retained
Accessory Power (RAP) On After Timeout (Except XUV)

-

Retained Accessory Power (RAP) On After Timeout (XUV) See: Diagnosis By Symptom - Computer/Integrating Systems/Retained Accessory
Power (RAP) On After Timeout (XUV)

-

Retained Accessory Power (RAP) Inoperative (Except XUV) See: Diagnosis By Symptom - Computer/Integrating Systems/Retained Accessory
Power (RAP) Inoperative (Except XUV)

-

Retained Accessory Power (RAP) Inoperative (XUV) See: Diagnosis By Symptom - Computer/Integrating Systems/Retained Accessory Power
(RAP) Inoperative (Except XUV)

Initial Inspection and Diagnostic Overview|Page 3437 > < Initial Inspection and Diagnostic Overview