Envoy 4WD V8-5.3L VIN M (2005)
Fuel Level Sensor: Service and Repair
Fuel Sender Assembly Replacement
FUEL SENDER ASSEMBLY REPLACEMENT
TOOLS REQUIRED
J 44402 Fuel Tank Sending Unit Wrench
REMOVAL PROCEDURE
1. Remove the fuel tank.
2. Remove the fuel feed (1) and EVAP (2) lines from the fuel sender assembly.
3. Using J 44402, remove the fuel sender lock ring (1).
4. Remove the fuel sender assembly (2) and seal (3). Discard the seal.
5. Clean the fuel sender sealing surfaces (4).
CAUTION: Refer to Fuel Storage Caution in Service Precautions.
INSTALLATION PROCEDURE
