Envoy 4WD V8-5.3L VIN M (2005)
1. Uncap the fuel fill pipe (9).
2. Install the fuel fill pipe (7).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Connect the fuel fill hose (9) to the fuel fill pipe (7).
Tighten the clamp to 2.5 N.m (22 lb in).
4. Install the fuel fill pipe ground strap bolt (3).
Tighten the bolt to 10 N.m (89 lb in).
5. Lower the vehicle.
6. Install the fuel fill pipe bracket nuts (2).
Tighten the nuts to 10 N.m (89 lb in).
7. Install the fuel fill pipe housing.
8. Install the fuel fill cap.