Envoy 4WD V8-5.3L VIN M (2005)
9. Remove the forward curtain clip (2).
10. Remove the 3 bolts (1, 3) retaining the air bag module to the roof.
11. Remove the roof rail air bag from the vehicle.
INSTALLATION PROCEDURE
1. Install the 3 bolts (1, 3) retaining the roof rail air bag module to the roof.
Tighten the roof rail air bag module bolts to 9 N.m (79 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the forward curtain clip (2).
3. Install the bolt retaining the bracket to the roof.