Envoy 4WD V8-5.3L VIN M (2005)
Suspension Control Module: Service and Repair
Shock Module Yoke Replacement
Shock Module Yoke Replacement
Tools Required
^
J24319-B Steering Linkage and Tie Rod Puller
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the shock module yoke to lower control arm mounting nut.
4. Install J24319-B to the shock module yoke to lower control arm stud.
5. Disconnect the shock module yoke from the lower control arm using J24319-B.
6. Remove the shock module yoke to shock absorber pinch bolt and nut.