Envoy 4WD V8-5.3L VIN M (2005)
Seat Belt Buckle: Service and Repair
Center Rear (Trailblazer EXT, Envoy XL, Envoy XUV)
SEAT BELT BUCKLE REPLACEMENT - CENTER REAR (TRAILBLAZER EXT, ENVOY XL, ENVOY XUV)
REMOVAL PROCEDURE
1. Remove the seat from the vehicle.
2. Remove the trim panel from the seat cushion.
3. Remove the bolt (1) securing the center buckles to the mid-position floor latch assembly.
4. Remove the center seat belt buckles.
INSTALLATION PROCEDURE
1. Install the center seat belt buckles to the mid-position floor latch assembly with the bolt (1).
Tighten the rear center seat belt buckle assembly bolt to 60 N.m (44 lb ft).
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the trim panel to the seat cushion.
3. Install the seat in the vehicle.
No. 2 Rear
SEAT BELT BUCKLE REPLACEMENT - NO. 2 REAR
REMOVAL PROCEDURE
1. Remove the seat assembly from the vehicle.
2. Remove the grommet (1). Discard the old grommet.
