Envoy 4WD V8-5.3L VIN M (2005)
1. Install a NEW seal (3) onto the fuel tank.
IMPORTANT: Never reuse the old seal or a fuel leak may occur. Always use a NEW seal.
2. Install the fuel sender assembly (2).
IMPORTANT: Place the fuel pump strainer in a horizontal position when you install the fuel sender in the tank. When installing the fuel sender
assembly, assure that the fuel pump strainer does not block full travel of the float arm.
3. Using J 44402, install the fuel sender lock ring (1).
4. Install the fuel feed (1) and EVAP (2) lines to the sender assembly.
5. Install the fuel tank.
