Envoy 4WD V8-5.3L VIN M (2005)
7. Install the outer tie rod to the steering knuckle.
8. Install the new outer tie rod retaining nut.
Tighten the outer tie rod retaining nut to 60 Nm (44 ft. lbs.).
9. Install the wheel hub and bearing.
10. Install the tire and wheel.
11. Lower the vehicle.
12. Install the drive axle nut.
Tighten the drive axle nut to 140 Nm (103 ft. lbs.).
13. Adjust the front toe.
