Envoy 4WD V8-5.3L VIN M (2005)
8. Remove the oil level indicator tube.
9. Remove the seal from the transmission, if necessary.
Installation Procedure
1. Install a NEW seal to the indicator tube.
2. Install the oil level indicator tube.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the indicator tube nut.
Tighten the nut to 18 Nm (13 ft. lbs.).
4. Install the catalytic converter.
5. Install the transmission crossmember.
6. Remove the support from the transmission.
7. Lower the vehicle.
8. Install the transmission oil level indicator.
9. Fill the transmission to the proper level with DEXRON(r) III transmission fluid.
Repair Instructions
Filler Tube and Seal Replacement (LL8)
Removal Procedure
