Envoy 4WD V8-5.3L VIN M (2005)
Pinion Bearing: Service and Repair
Drive Pinion Bearings Replacement
Tools Required
^
J7817 Outer Bearing Race Installer
^
J8092 Universal Driver Handle- 3/4 inch - 10
^
J8608 Rear Pinion Bearing Race Installer
^
J8611-01 Rear Pinion Bearing Race Installer
^
J8614-01 Flange and Pulley Holding Tool
^
J22912-01Split-Plate Bearing Puller
^
J24433 Pinion Cone and Side Bearing Installer
^
J33782 Pinion Oil Seal Installer
^
J38694 Extension Housing Oil Pump/Seal Installer
^
J45871 Pinion Bearing Remover
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the differential.
3. Remove the drive pinion from the axle.
4. For the 8.0 inch axle, press the bearing off of the pinion using the J22912-01.
5. For the 8.6 inch axle, install the J45871 (1) around the pinion bearing and the J22912-01 (2) in the inverted position around the J45871.
6. Press the bearing off of the pinion using the J45871 and the J22912-01.
7. Remove the shim.
