Envoy 4WD V8-5.3L VIN M (2005)
Back Window Regulator: Service and Repair
Window Regulator Replacement - Endgate
Removal Procedure
1. Swing the endgate open.
2. Remove the regulator bolt access plugs (3).
3. Remove the endgate trim panel.
4. Remove the endgate inner panel reinforcement.
5. Remove the endgate window.
6. Remove the bolt (3) retaining the regulator to the endgate.
7. Loosen the nuts (1) retaining the regulator rails to the endgate.
8. Remove the regulator by sliding the regulator side rails up and out of the keyhole slots (2) in the gate.