Envoy 4WD V8-5.3L VIN M (2005)
Headlamp Washer Pump: Service and Repair
WASHER PUMP REPLACEMENT - HEADLAMP
REMOVAL PROCEDURE
1. Remove the washer solvent container.
2. Disconnect the headlamp washer hose from the pump (1).
3. Remove the pump (1) from the solvent container by carefully pulling the pump outward from the retainer (3).
4. Remove the pump (1) from the sealing grommet (2) and discard the grommet.
INSTALLATION PROCEDURE
1. Install a new washer pump grommet into the washer container.
2. Lubricate the grommet with clean washer solvent.
3. Install the pump (1) to the sealing grommet (2).
4. Install the pump (1) to the retainer (3) on the solvent container.
5. Connect the headlamp washer hose to the pump (1).
6. Install the washer solvent container.