gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Bracket Replacement - Console Floor|Page 11077 > < Bracket Replacement - Console Floor|Page 11075
Page 6
background image

INSTALLATION PROCEDURE

1. If replacing the console, install the noise cancellation microphone if equipped.
2. If replacing the console, install the power sunroof switch if equipped.
3. If replacing the console, install the personal message player/recorder if equipped.
4. If replacing the console, install the OnStar (R) microphone if equipped.
5. If replacing the console, install the garage door opener if equipped.

6. Position the console to the roof panel.
7. Connect the electrical connectors as needed.
8. Seat the front retaining tabs.
9. Install the 2 screws retaining the console to the roof panel.

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten the screws to 1.2 N.m (10 lb in).

Roof Console Retainer Replacement

Roof Console Retainer Replacement

Removal Procedure

1. Lower the headliner. Refer to Headliner Replacement (TrailBlazer, Envoy, Bravada) Headliner Replacement (TrailBlazer EXT, Envoy XL)

Headliner Replacement (Envoy XUV).

2. Remove the 4 screws securing the console retainer to the Z clips.
3. Remove the roof retainer from the vehicle.
4. If replacing the roof retainer, remove the Z clips from the roof panel.

Installation Procedure

1. If replacing the roof retainer, install the roof retainer the roof panel ensuring the Z clips are fully seated.
2. If installing the existing roof retainer, position the roof retainer to the roof panel.

Bracket Replacement - Console Floor|Page 11077 > < Bracket Replacement - Console Floor|Page 11075