Envoy 4WD V8-5.3L VIN P (2004)
Glove Compartment: Service and Repair
DOOR REPLACEMENT - INSTRUMENT PANEL (I/P) COMPARTMENT
REMOVAL PROCEDURE
1. Remove the right closeout/insulator panel.
2. Remove the 3 storage compartment retaining screws.
3. Remove the storage compartment from the IP.
INSTALLATION PROCEDURE
1. Position the storage compartment to the IP.
2. Install the 3 screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 2.5 N.m (22 lb in).
3. Install the right closeout/insulator panel.
