Envoy 4WD V8-5.3L VIN P (2004)
Passenger Assist Handle: Service and Repair
Assist Handle Replacement
Removal Procedure
1. Use a flat bladed tool in order to open the front and rear bezel covers.
2. Position the stem of a flat bladed tool at the rear bezel.
3. Push the rear bezel rearward 6 mm (1/4 in) and pull down on the handle in order to release the roof panel retaining tab.
4. Position the stem of a flat bladed tool at the inside edge of the front bezel assembly.
5. Push the front bezel assembly forward 6 mm (1/4 in) and pull down on the handle in order to release the roof panel retaining tab.
6. Partially lower the headliner in order to expose the rear handle retaining tab (1).
7. Insert the tip of a flat bladed tool into the rear retaining tab (1).
8. With the retaining tab (1) released, pull down on the handle in order to release the roof panel tab from the bezel.
