Envoy 4WD V8-5.3L VIN P (2004)
2. Remove the 2 bolts securing the bracket assembly to the seat cushion.
3. Remove the bracket assembly from the seat cushion.
INSTALLATION PROCEDURE
1. Position the bracket assembly on the seat cushion.
2. Install the 2 bolts securing the bracket assembly to the seat cushion.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the rear seat cushion bracket bolts to 25 N.m (18 lb ft).
3. Install the rear seat cushion assembly in the vehicle.