Envoy 4WD V8-5.3L VIN P (2004)
Traction Control Switch: Service and Repair
Traction Control Switch Replacement (GMC, Chevrolet)
Removal Procedure
1. Remove the accessory trim plate.
2. Disconnect the electrical connector from the traction control switch.
3. Release the traction control switch locking tabs located behind the trim plate.
4. Remove the traction control switch from the trim plate.
Installation Procedure
1. Position the traction control switch to the trim plate
2. Install the traction control switch to the instrument panel trim plate by seating the locking tabs.
3. Connect the electrical connector to the traction control switch.
4. Install the accessory trim plate.
