Envoy 4WD V8-5.3L VIN P (2004)
Important: Installing a rubber plug and/or cap fitting to the exposed brake pipe fitting ends will prevent brake fluid loss and contamination.
5. Install the rubber plug and/or cap on the rear brake pipe fitting.
6. Remove the brake line retaining bolt at the frame.
7. Remove the brake hose bolt from the brake caliper.
Important: The metal gaskets may be stuck to either the brake caliper or the brake hose end. Ensure that these gaskets are removed from the brake
hose end and the brake caliper.
8. Remove the copper gaskets from the brake hose end.
9. Discard the copper gaskets.
10. Remove and discard the copper gaskets.
