Envoy 4WD V8-5.3L VIN P (2004)
REMOVAL PROCEDURE
1. Remove the right rear quarter trim panel.
2. Remove the lower air duct fastener (4).
3. Remove the mid-upper air distribution fastener (6).
4. Remove the mid-upper air distribution duct (6).
5. Remove the lower air duct (5) from the vehicle.
INSTALLATION PROCEDURE
1. Install the mid-upper air distribution duct (6).
2. Install the mid-upper air distribution fastener (7).
3. Tighten the mid-upper air distribution screw.
NOTE: Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings
Tighten
Tighten the screw to .....1.9 N.m (17 lb in).
4. Install the lower air duct (5) to the vehicle.
Tighten
Tighten the screw to .....1.9 N.m (17 lb in).
5. Install the lower air duct screw (4).