Envoy 4WD V8-5.3L VIN P (2004)
1. Connect the HVAC control-auxiliary electrical connector.
2. Install the HVAC control-auxiliary in the console bottom first.
3. Push in at the top of the HVAC control-auxiliary in order to engage the HVAC control-auxiliary in the console/seat.
Primary
HVAC CONTROL MODULE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the IP accessory trim plate.
2. Remove the HVAC control module screws.
3. Depress the HVAC control module tabs (3) and remove the HVAC control module (2) from the IP (4).
