Envoy 4WD V8-5.3L VIN P (2004)
1. Apply pipe sealant or equivalent to the drain plug threads.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the drain plug.
^
Tighten the plug to 27 Nm (20 ft. lbs.).
3. Fill the transfer case with the proper fluid.
4. Apply pipe sealant or equivalent to the fill plug threads.
5. Install the fill plug.
^
Tighten the plug to 27 Nm (20 ft. lbs.).
6. Install the transfer case shield, if equipped.
7. Lower the vehicle