Envoy 4WD V8-5.3L VIN P (2004)
9. Verify that the vehicle meets the following conditions:
-
The vehicle is not in a reduced engine power mode.
-
The ignition is ON.
-
The engine is OFF.
10. Connect a scan tool in order to test for a proper throttle-opening and throttle-closing range.
11. Operate the accelerator pedal and monitor the throttle angles. The accelerator pedal should operate freely, without binding, between a closed
throttle, and a wide open throttle (WOT).
12. Start the engine.
13. Inspect for coolant leaks.