Envoy 4WD V8-5.3L VIN P (2004)
Power Steering Pump: Service and Repair
Power Steering Pulley Replacement
Power Steering Pulley Replacement
Tools Required
^
J25033-C Power Steering Pump Pulley Installer
^
J25034-C Power Steering Pump Pulley Remover
Removal Procedure
1. Remove the power steering pump.
2. Secure the power steering pump in a vise, taking care not to damage the power steering reservoir.
3. Using the J25034-C, remove the power steering pump pulley.
Installation Procedure
1. Position the power steering pump pulley to the end of the power steering pump shaft.
2. Using the J25033-C, install the power steering pump pulley to the power steering pump.