Envoy 4WD V8-5.3L VIN P (2004)
3. Align the power steering pump (1) with mounting bolt holes on engine block (2).
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the power steering pump mounting bolts (3).
Tighten the bolts to 25 Nm (18 ft. lbs.).
5. Attach the power steering pump return hose (3) to power steering pump (2).
6. Attach the power steering pump pressure hose (1) to power steering pump (2).
Tighten the fittings to 25 Nm (18 inch lbs.).
7. Install the PCM to PCM mounting bracket.
8. Install the drive belt.
9. Fill the power steering pump reservoir.
10. Bleed the power steering system.
