Envoy 4WD V8-5.3L VIN P (2004)
Steering Gear: Service and Repair
Power Steering Gear Replacement
Power Steering Gear Replacement
Tools Required
^
J24319-B Steering Linkage and Tie Rod Puller
^
J44586 Power Steering Gear Oil Seal Remover/Installer
Removal Procedure
1. Raise and support the vehicle.
2. Install a drain pan under the vehicle.
3. Remove the tires and wheels.
4. Remove outer tie rods retaining nuts.
Notice: Do not attempt to disconnect a steering linkage joint by driving a wedge between the joint and the attached part. Seal damage may result
which will cause premature failure of the joint.
5. Disconnect the outer tie rods from the steering knuckles using J24319-B.
