Envoy 4WD V8-5.3L VIN P (2004)
Control Arm: Service and Repair
Front Suspension
Lower Control Arm Bracket Replacement
Lower Control Arm Bracket Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the stabilizer shaft link lower retaining nut.
4. Disconnect the stabilizer shaft link and washer from the lower control arm.
5. Remove the lower control arm to lower control arm bracket mounting nuts.
Important: Note the direction the bolts are removed for reinstallation.
6. Remove the lower control arm to lower control arm bracket mounting bolts.
Important: Take care not to disengage the axle shaft from the transmission.
