Envoy 4WD V8-5.3L VIN P (2004)
Control Arm: Service and Repair
Rear Suspension
Rear Axle Upper Control Arm Replacement
Rear Axle Upper Control Arm Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the wheelhouse panel.
4. Raise and support the rear axle at the designed D - height.
5. If equipped with air suspension, Repressurize the air suspension system.
6. If equipped with air suspension, disconnect the air suspension leveling sensor link from the rear axle upper control arm.
7. Remove the rear axle upper control arm to axle mounting bolt and nut.