Envoy 4WD V8-5.3L VIN P (2004)
7. Install the shock module yoke to the shock absorber.
8. Install the shock module yoke to shock absorber pinch bolt and nut.
Tighten the shock module yoke to shock absorber pinch bolt to 70 Nm (52 ft. lbs.).
9. Install the shock module to the vehicle.
10. Install the tire and wheel.
11. Lower the vehicle.
Shock Module Yoke Replacement
Shock Module Yoke Replacement
Tools Required
^
J24319-B Steering Linkage and Tie Rod Puller
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel.
3. Remove the shock module yoke to lower control arm mounting nut.