Envoy 4WD V8-5.3L VIN P (2004)
1. Install the transmission oil cooler lines to the vehicle.
2. Install the transmission cooler lines to the transmission.
3. Connect the rear cooler lines (2) to the front cooler lines (1).
4. Install the cooling line ends (3) to the transmission.
5. Raise the transmission into position.
6. Install the front exhaust pipe assembly.
7. Install the transmission support.
8. Remove the transmission jack.
9. Install the clip that holds the cooler lines together.
10. Install the cooler lines to the retainer (2) located on the right side of the engine.
11. Install the front sections of the cooler lines to the vehicle.
12. Install the cooler lines to the retainer located on the radiator shroud.
