Envoy 4WD V8-5.3L VIN P (2004)
16. Using a brass drift or equivalent, remove the right wheel drive shaft from the front differential.
17. Position the wheel drive shafts to the side.
Important: DO NOT allow the shock modules and steering knuckle to hang without supporting them.
18. Using mechanics wire or metal hooks, secure the shock modules to the frame.
19. Remove the jack stand.
Important: It is not necessary to completely remove the front propeller shaft from the vehicle.
20. Remove the front propeller shaft from the front pinion yoke.
21. Relocate the propeller shaft to the side and secure.
22. Remove the inner axle shaft.
23. Remove the mounting bolts for the front differential assembly.
24. Remove the front differential assembly from the oil pan.
25. Secure the front differential to the frame.
