Envoy 4WD V8-5.3L VIN P (2004)
4. Install the rear propeller shaft.
5. Inspect the transfer case fluid level.
6. Lower the vehicle.
Transfer Case Input Shaft Seal Replacement
Transfer Case Input Shaft Seal Replacement
^
Tools Required
-
J 42738 Seal Installer
Removal Procedure
1. Raise the vehicle.
2. Remove the transfer case assembly.
Notice: Refer to Transfer Case Seal Removal Notice in Cautions and Notices.
Notice: Do not damage the sealing surfaces of the transfer cases or the shafts when prying the seals for removal. Damaging the sealing surface may
cause leakage or require replacement of the damaged component.
3. Insert a flat-bladed screw driver between the input shaft seal and the transfer case.