Envoy 4WD V8-5.3L VIN P (2004)
Seals and Gaskets: Service and Repair
NVG 226-NP8
Trail Blazer, Envoy, Rainier, Bravada
Transfer Case Output Shaft Seal Replacement ~ Front (Trail Blazer, Envoy, Rainier, Bravada)
^
Tools Required
-
J 45236 Output Shaft Seal Installer - Front
Removal Procedure
1. Raise the vehicle.
2. Remove the fuel tank shield, if equipped.
3. Remove the front propeller shaft.
4. Remove the dust shield from the front output shaft.
5. Lightly tap the screw driver around the edge of the front output shaft seal.
