Envoy 4WD V8-5.3L VIN P (2004)
1. Install the regulator to the mid gate.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the nuts retaining the window regulator to the mid gate.
Tighten the window regulator nuts to 25 N.m (18 lb ft).
3. Install the mid gate window position switch (2) to the window regulator.
4. Connect the window regulator electrical connector (1).
5. Install the mid gate window.
6. Check and adjust the mid gate window alignment to the weatherstrip channel. Refer to Window Replacement - Midgate.
7. Install the mid gate inner panel.
