G 1500 1/2 Ton Van V6-4.3L VIN W (1996)
Engine Mount: Service and Repair
Engine mount replacement. G Models With 4.3L Engine
1. Remove engine mount through bolt, from below frame mounting bracket, Fig. 1. When replacing right side mount on some models with
4.3L/V6-262 engine, it is only necessary to loosen the through bolt.
2. Raise and support engine, then remove mount attaching bolts and the mount. Raise engine only enough to gain sufficient clearance for removal.
Check for interference between rear of engine and cowl panel.
3. Install new engine mount to engine, then tighten attaching bolts.
4. Install and tighten engine mount through bolt.