gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Suspension > < Manual Steering Gear - Saginaw Recirculation Ball|Page 8923
Page 1
background image

Steering Wheel: Service and Repair

WARNING: Refer to Air Bags and Seat Belts/ Air Bags (Supplemental Restraint Systems)/ Service Precautions/ Technician Safety
Information.

Note: Scribe alignment marks on steering wheel and shaft to ensure correct installation.

1. Disconnect battery ground cable.
2. Remove horn button cap.
3. Remove snap ring and steering wheel retaining nut, then if equipped, the horn lead assembly.
4. Using a suitable puller, remove steering wheel.
5. Reverse procedure to install, ensuring turn signal switch is in neutral position.

Suspension > < Manual Steering Gear - Saginaw Recirculation Ball|Page 8923