gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Electric Door Lock Switch - Separation|Page 100 > < Ignition Control Module|Testing and Inspection|Page 89
Page 1
background image

Power Door Lock Switch: Customer Interest
Electric Door Lock Switch - Separation

CORPORATE NUMBER: 631011R                            NUMBER: 86-T-123

GROUP:

8A-Cab Electrical

IMPORTANT - All Service Personnel Should Read

DATE:

October, 1986

SUBJECT:

ELECTRIC DOOR LOCK SWITCH SEPARATION

MODELS:

1985-86 C, K, G-1, 2, 3 TRUCKS WITH ELECTRIC DOOR LOCKS

Some electric door lock switches may become separated while installed in the vehicle. This condition may be reported on either the right or left or both
doors. A clip has been released to correct this condition.

The subject trucks use switch P/N 20043224. To update existing switches, use clip P/N 16602550. Future production of this switch will include
installation of the clips by the supplier.

To install clips:

1.

Remove switch assembly as described in section 8A of the Service Manual.

Electric Door Lock Switch - Separation|Page 100 > < Ignition Control Module|Testing and Inspection|Page 89