gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Engine Compartment - Water Intrusion|Page 5272 > < Engine Compartment - Water Intrusion|Page 5266
Page 1
background image

Splash Guard: All Technical Service Bulletins
Engine Compartment - Water Intrusion

GMC NUMBER:

91-10-155

GROUP:

10 Body

DATE:

October, 1991

CORPORATE NUMBER: 161510

SUBJECT:

INCREASED ROAD SPLASH IN ENGINE COMPARTMENT (INSTALL REVISED SPLASH SHIELD)

MODELS:

1983-1991 G-VANS W/6.2L ENGINE (VIN C, J)

Some 1983-1991 G1, G2, and G3 vehicles with 6.2L diesel engines may experience increased splashing of rain water into the engine compartment in the
vicinity of the generator. In an effort to improve this condition and prevent the contamination of underhood components, a revised right wheel-well
splash shield has been released for vehicles equipped with the 6.2L diesel engine.

This new splash shield (P/N 15685862) is installed in the front of the right wheel-well opening with four plastic rivets (P/N 14063981).

SERVICE PROCEDURE:

1. Raise the front end of the vehicle with a floor jack to obtain sufficient clearance from the tire. It is not necessary to remove the tire.

Figure 1

2. Position the splash shield (P/N 15685862) in the wheel-well opening as shown in figure 1. Using the splash shield as a template, mark the position of

the four attaching holes.

3. Using a 1/4-inch drill bit, drill the four attaching holes in the fender well.
4. Install the splash shield with the four retaining rivets (P/N 14063981) or equivalent.

SERVICE PARTS INFORMATION:

Description

Part Number

Quantity
Required

Engine Compartment - Water Intrusion|Page 5272 > < Engine Compartment - Water Intrusion|Page 5266