G 1500 1/2 Ton Van V8-5.7L VIN R (1996)
1. Disconnect the battery negative cable assembly from the battery negative terminal.
2. Remove the engine cover.
3. Remove the air cleaner assembly and intake duct.
4. Remove the coolant reservoir.
5. Remove the wiring harness connectors and the brackets and move aside.
6. Remove the throttle cable and the bracket from the upper intake manifold.
7. Remove the cruise control cable (if equipped).
8. Remove the fuel lines from the intake to the rear of the intake manifold.
9. Remove the fuel line bracket at the rear of the lower intake manifold.
10. Remove the PCV hose at the upper intake Manifold.
11. Remove the purge solenoid and bracket.
12. Remove the upper intake manifold bolts and studs. Mark the location of all studs for proper reassembly.
13. Remove the upper intake, manifold.
