G 1500 1/2 Ton Van V8-5.7L VIN R (1996)
Knock Sensor: Description and Operation
Description
The Knock Sensor (KS) system is used to detect engine detonation The VCM will retard the spark timing based on the signals from the KS module. The
Knock Sensor(s) produce an AC voltage that is sent to the KS module. The amount of AC voltage produced is proportional to the amount of knock.
Operation
An operating engine produces a normal amount of engine mechanical vibration (Noise). The knock sensor(s) will produce an AC voltage signal from this
Noise. When an engine is operating, the VCM will learn the minimum and maximum frequency of the noise the engine produces. When the VCM
determines that this frequency is less than or greater than the expected amount, a knock sensor DTC will set.
