G 2500 3/4 Ton Van V6-262 4.3L VIN Z (1992)
1.
Insert the ends of a pair of needle nose pliers into the striker bolt engagement opening on the door (Figure 1), and remove any remnants of the old
broken spring.
2.
Insert the needle nose pliers into one of the vertical loops of the 15963050 striker bolt pull-back spring.
3.
Insert the spring into the striker bolt engagement opening of the door and allow the free vertical loop of the pull-back spring to engage the lower
lock rotor. With the spring attached to the lower rotor, attach the other end to the upper lock rotor (Figure 2).
4.
Cycle door to assure security of the spring.
