G 2500 3/4 Ton Van V6-262 4.3L VIN Z (1992)
Fan Clutch: Component Tests and General Diagnostics
Bi-Metallic Coiled Spring Removal
Do not operate the engine until the fan has been first checked for possible cracks and separations.
Run the engine at a fast idle speed (1000 RPM) until normal operating temperature is reached. Regardless of temperatures, the unit must be operated
for at least five minutes immediately before being tested.
Stop the engine, then using a glove or a cloth to protect the hand, immediately check the effort required to turn the fan. If considerable effort is
required, it can be assumed that the coupling is operating satisfactorily. If very little effort is required to turn the fan, it is an indication that the coupling
is not operating properly and should be replaced.
The clutch fan may be tested while the vehicle is being driven. To check, disconnect the bimetal spring, Fig. 3, and rotate 90° counterclockwise. This
disables the temperature-controlled, free-wheeling feature and the clutch performs like a conventional fan. If this cures the overheating condition, replace
the clutch fan.
