G 2500 3/4 Ton Van V6-262 4.3L VIN Z (1992)
Manual Transmission Shift Light
Circuit Description:
The control module uses information from the following inputs to control the shift light:
-
Coolant Temperature Sensor (CTS)
-
Throttle Position Sensor (TPS)
-
Vehicle Speed Sensor (VSS)
-
RPM
The control module uses the measured rpm and the vehicle speed to calculate what gear the vehicle is in. It's this calculation that determines when
the shift light should be turned "ON".
Test Description:
Numbers below refer to circled numbers on the diagnostic chart.
1. This should not turn "ON" the shift light. If the light is "ON", there is a short to ground in CKT 456 wiring, or a fault in the control module.
2. This should turn "ON" the shift light
3. This checks for an open in the shift light circuit, or a faulty control module.
