G 2500 3/4 Ton Van V6-262 4.3L VIN Z (1992)
7.
Pressed plugs are replaced with a service fill plug provided in the kit, which is expanded once in place. Lightly lubricate (with light engine oil) the
head of tool J-34118, and place the replacement fill plug on the end, see figure (8).
8.
Insert the fill plug, with the tool, into the bead fill hole using tool J-34118. The plug outer rim must be flat and tight against converter shell.
Tighten the tool with a wrench to 35 lb, ft./48 nm torque.
