gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Oil Pressure Gauge - Erratic Reading Concerns|Page 430 > < Oil Pressure Gauge - Erratic Reading Concerns
Page 1
background image

Oil Pressure Sender: All Technical Service Bulletins
Oil Pressure Gauge - Erratic Reading Concerns

File In Section: 6 - Engine
Bulletin No. 47-61-49
Date: December, 1994

Subject:
Oil Pressure Gauge Reading Concerns (Replace Oil Pressure Sending Unit)

Models:
1991-94 Chevrolet and GMC Truck C/K, S/T, P Models, M/L, G Vans
1991-92 Oldsmobile Bravada with 2.2L, 4.3L, 5.0L, 5.7L, 7.4L Engines (VINs 4, Z, H, K, N - RPOs LN2, LB4, L03, L05, L19)

CONDITION
Some owners may comment on one or all of the following conditions:

^ High oil pressure when starting engine cold.
^ Low oil pressure when engine is at idle hot.
^ Erratic gauge readings.

CAUSE
Oil pressure sending unit was not optimally calibrated for all operating conditions.

CORRECTION
If actual oil pressures are within tolerances listed in Section 6A of the Service Manual, and gauge circuit electrical diagnostics in Section SC of the
Service Manual do not uncover the source of the problem, an improved oil pressure sending unit should be installed.

Parts Information

DESCRIPTION

PART NUMBER

Oil Pressure Sending Unit

12553175

Parts are currently available from GMSPO.

Warranty Information
For vehicles repaired under warranty, use:

LABOR OPERATION LABOR TIME
N222O

Use published labor operation and time.

Oil Pressure Gauge - Erratic Reading Concerns|Page 430 > < Oil Pressure Gauge - Erratic Reading Concerns