gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Front Doors|Page 10720 > < Front Doors|Page 10718
Page 1
background image

Power Door Lock Actuator: Service and Repair
Side Doors

Remove or Disconnect

1. Negative (-) battery cable.
2. Door trim panel.
3. Electrical connector from the motor.
4. Door to motor screws (370).
5. Motor from the lock rod.

^

Slide the rubber mount at the top of the motor off of the door lock rod.

6. Motor from the door.

Install or Connect

1. Motor into the door.
2. Motor to the lock rod.

^

Slide the rubber mount at the top of the motor onto the door lock rod.

3. Door to motor screws (370).
4. Electrical connector to the motor.
5. Door trim panel.
6. Negative (-) battery cable.

Front Doors|Page 10720 > < Front Doors|Page 10718