G 2500 3/4 Ton Van V8-305 5.0L (1990)
Removing The Retainer Ring
4. Bearing (5) from the pulley (6).
Important
^
When using J 24092, the puller arms must extend around to the rear side of the pulley. Do not attempt to pull the pulley off by engaging the
puller arms in a multi-groove pulley.
^
Remove the retaining ring (3).
Removing The Bearing From The Pulley
^
Pulley (6) to J 21352.
^
Drive the bearing (95) from the pulley (6) with J 9398 and J8092.
Install or Connect
Tools Required:
J 6435 Snap Ring Pliers
J 8092 Driver Handle
J 9481-A Pulley Bearing and Pulley Installer
