G 2500 3/4 Ton Van V8-305 5.0L (1990)
J 9398-A Pulley Bearing Remover
J 9481-A Pulley Bearing and Pulley Installer
J 24092 Pulley Hub Adapter Set
1. Clutch plate and hub assembly (2).
Removing The Retainer Ring
2. Pulley bearing retainer (2) with J 6435.
3. Pulley (6).
Removing The Pulley And Bearing
^
Install J 9395 over the end of the compressor shaft (38).
Important
^
Use J 9395 puller pilot to prevent internal damage to the compressor when removing the pulley. Do not use the pulley directly against the end
of the shaft.
^
Place J 8433 over J 9395 for the regular V-groove pulley.
^
Place J 24092 over J 9395 for the multi-groove pulley (6).
^
Turn the screw on J 8433 to remove the pulley (6).
