gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

All Other Service Bulletins for Multiple Junction Connector: > < Engine - Drive Belt Misalignment Diagnostics|Page 4656
Page 1
background image

Drive Belt: All Technical Service Bulletins
A/C - Low Mileage, Compressor Belt Wear

SUBJECT:

INCORRECT AIR CONDITIONING COMPRESSOR BELT

MODELS:

1985-86 G VANS EQUIPPED WITH 4.3L (VIN CODE N), 5.0L (VIN CODES H,F), OR 5.7L (VIN CODE L) ENGINE

GMC NUMBER:

86-T-127

SECTION:

6B - Engine Cooling

DATE:

December, 1986

Some 1985-86 G vans equipped with the 4.3L, 5.0L, or 5.7L engine and air conditioning (A/C) may experience low mileage A/C compressor belt wear.
This condition may be caused by an incorrect belt being installed during production of the vehicle. The incorrect A/C belt (3/8" x 55") has a center
cordline (CCL) too low in the belt cross section which can cause overloading of the belt.
A new A/C belt (3/8" x 54.5" "High Ride") which has a higher CCL has been released for service use. If this condition is encountered, replace the A/C
compressor belt with P/N 469594. Tighten belt to 645 N (145 lb) using belt tension gauge J-23600-B or BT 33-95-ACBN. Refer to the belt replacement
procedures in the Light Duty Service Manual, Section 6B, Engine Cooling.

All Other Service Bulletins for Multiple Junction Connector: > < Engine - Drive Belt Misalignment Diagnostics|Page 4656